Wilden Diaphragm Pump P.025 KZPPP-TNL-TF-KTV

Wilden Diaphragm Pump P.025 KZPPP-TNL-TF-KTV

Wilden Diaphragm Pump T8-AAAABNESNENE- 0014

Wilden Diaphragm Pump T8-AAAABNESNENE- 0014

Wilden Diaphragm Pump P200PKPPPTNUTFPTV

$4,230.77
Availability: In stock
SKU
PUMP-0295026

Packing and shipping

Packaging Regulation :

Wooden box

Delivery time :

7~14 days(About)

Conditions :

New and Genuine

Okmarts | Water pump supplier priceOkmarts is the pump equipment expert

How do you order?

A&S makes ordering GET Parts easy. Simply send a mail to Us. Instead of searching online and guessing which parts you need, our team will make sure you get the correct parts. We process and deliver your order fast, and always at a competitive price. Enjoy 5-star service!


1.IDENTIFY
Determine the parts you need. To ensure the correct parts are quoted, it's best to have the machine make and model, along with part numbers and photos of the nameplate if possible. Our team of professionals are here to help ensure you get the correct parts that fit and work the first time. Our sales team can also survey and help identify the parts you may need. Please email us to get started!

2.ORDER
Our professional internal sales teams and strong supply chain system will assist you to identify the right parts, and can recommend the most cost-effective solution for you. Our team of professionals will process your order, and ensure your order is correct the first time. With over 15 years in the business, we remove the guesswork and always deliver.

3.DELIVER
We'll ship or deliver your products as required, to your nominated location. If you're also located elsewhere, we'll identify the best shipping options for both price and delivery time. Email us now!

P200PKPPPTNUTFPTV-PSG00462212

P200

Advanced Maintenance™ Series PLASTIC Pumps

CAUTIONS - READ FIRST!

TEMPERATURE LIMITS*

Wetted Path

Polypropylene (PP)              0°C to 79.4°C 32 °F to 175°F

Polyvinylidene fluoride (PVDF)     -12.2°C to 107.2°C 10 °F to 225°F

PFA                           -28.9°C to 87.8°C -20 °F to 190°F

Elastomers

Neoprene                      -17.8°C to 93.3°C 0 °F to 200°F

Buna-N                        -12.2°C to 82.2°C 10 °F to 180°F

EPDM                          -51.1°C to 137.8°C -60 °F to 280°F

Viton®                        -40°C to 176.7°C -40 °F to 350°F

Wil-Flex                      -40°C to 107.2°C -40 °F to 225°F

Polyurethane                    12.2°C to 65.6°C 10 °F to 150°F

Tetra-FlexPTFE w/Neoprene      4.4°C to 107.2°C 40 °F to 225°F

Tetra-FlexPTFE w/EPDM         -10°C to 137°C 14 °F to 280°F

Polytetrafluoroethylene (PTFE)      4.4°C to 104.4°C 40 °F to 220°F

*Elastomer choice may change temperature limits

CAUTION: When choosing pump materials, be sure to check the temperature limits for all wetted components. Example: Viton® has a maximum limit of 176.7°C (350°F) but polypropylene has a maximum limit of only 79.4°C (175°F).

CAUTION: Maximum temperature limits are based upon mechanical stress only. Certain chemicals will significantly reduce maximum safe operating temperatures. Consult engineering guide for chemical compatibility and temperature limits.

CAUTION: Always wear safety glasses when operating pump. If diaphragm rupture occurs, material being pumped may be forced out air exhaust.

WARNING: Prevention of static sparking If static sparking occurs, fire or explosion could result. Proper grounding of pump, valves, and containers is critical when handling flammable fluids or whenever discharge of static electricity is a hazard.

NOTE: Do not exceed 5.2 bar (75 psig) air supply for PFA pumps.

CAUTION: Do not exceed 8.6 bar (125 psig) air supply on polypropylene and PVDF pumps.

CAUTION: Advancedseries plastic pumps are made with plastic that is not UV stabilized. Direct sunlight for prolonged periods can cause deterioration of plastics.

CAUTION: Before any maintenance or repair is attempted, the compressed air line to the pump

should be disconnected and all air pressure allowed to bleed from pump. Disconnect all intake, discharge and air lines. Drain the pump by turning it upside down and allowing any fluid to flow into a suitable container.

CAUTION: Blow out air line for 10 to 20 seconds before attaching to pump to make sure all pipe line debris is clear. Use an in-line air filter. A 5µ (micron) air filter is recommended.

NOTE: Tighten all bolts prior to installation. Fittings may loosen during transportation. See torque specifications on page 15.

NOTE: When installing polytetrafluoroethylene (PTFE) diaphragms, it is important to tighten outer pistons simultaneously (turning in opposite directions) to ensure tight fit.

CAUTION: Verify the chemical compatibility of the process and cleaning fluid to the pumps component materials in the Chemical Resistance Guide (see E4).

CAUTION: When removing the end cap using compressed air, the air valve end cap may come out with considerable force. Hand protection such as a padded glove or rag should be used to capture the end cap.

CAUTION: Do not over-tighten the air inlet reducer bushing. Additionally, too much torque on the muffler may damage the air valve muffler plate. Do not exceed 0.9 N·m (8 in-lbs).

NOTE: When reinstalling the outer pistons, apply two (2) drops of Loctite® 246 to the shaft internal threads before the diaphragm assembly.

 

P200PKPPPTNUTFPTV

 

 

WETTED PARTS & OUTER PISTON

KK = PVDF / PVDF

PK = POLYPROPYLENE / PVDF

TT = PTFE / PTFE

CENTER SECTION

PP = POLYPROPYLENE

AIR VALVE

P = POLYPROPYLENE

DIAPHRAGMS

BNS = BUNA-N (Red Dot)

FSS = SANIFLEX

[Hytrel® (Cream)]

EPS = EPDM (Blue Dot)

NES = NEOPRENE (Green Dot)

PUS = POLYURETHANE (Clear)

TEU = PTFE W/EPDM

BACK-UP (White)

TNU = PTFE W/NEOPRENE

BACK-UP (White)

TSU = PTFE W/SANIFLEX

BACK-UP (White)

VTS = VITON® (White Dot)

WFS = WIL-FLEX[Santoprene® (Orange Dot)]

VALVE BALL

BN = BUNA-N (Red Dot)

FS = SANIFLEX

[Hytrel® (Cream)]

EP = EPDM (Blue Dot)

NE = NEOPRENE (Green Dot)

PU = POLYURETHANE (Brown)

TF = PTFE (White)

VT = VITON® (White Dot)

WF = WIL-FLEX[Santoprene®

(Orange Dot)]

VALVE SEAT

K = PVDF

P = POLYPROPYLENE

T = PTFE PFA

VALVE SEAT O-RING

BN = BUNA-N

PU = POLYURETHANE (Brown)

TV = PTFE ENCAP. VITON®

WF = WIL-FLEX(Santoprene®

 

SPECIALTY CODES

0100 Wil-Gard II™ 110V

0102 Wil-Gard II™ sensor wires Only

0103 Wil-Gard II™ 220V

0206 PFA coated hardware,

Wil-Gard II™ sensor wires ONLY

0480 PCM I™ (Sensor & wires only)

0502 PFA coated hardware

0504 DIN flange

0506 DIN flange, PFA coated hardware

0603 PFA coated hardware, Wil-Gard II™ 110V

0604 DIN flange, Wil-Gard II™ 220V

0608 PFA coated hardware, Wil-Gard II™ 220V

 

 

The Wilden diaphragm pump is an air-operated, positive displacement, self-priming pump. These drawings show the flow pattern through the pump upon its initial stroke. It is assumed the pump has no fluid in it prior to its initial stroke.

 

P200PKPPPTNUTFPTV

FIGURE 1 The air valve directs pressurized air to the back side of diaphragm A. The compressed

air is applied directly to the liquid column separated by elastomeric diaphragms. The diaphragm acts as a separation membrane between the compressed air and liquid, balancing the load and

removing mechanical stress from the diaphragm. The compressed air moves the diaphragm away

from the center block of the pump. The opposite diaphragm is pulled in by the shaft connected to the pressurized diaphragm. Diaphragm B is on its suction stroke; air behind the diaphragm has been forced out to the atmosphere through the exhaust port of the pump. The movement of diaphragm B toward the center block of the pump creates a vacuum within chamber B. Atmospheric pressure forces fluid into the inlet manifold forcing the inlet valve ball off its seat. Liquid is free to move past the inlet valve ball and fill the liquid chamber (see shaded area).

 

FIGURE 2 When the pressurized diaphragm, diaphragm A, reaches the limit of its discharge

stroke, the air valve redirects pressurized air to the back side of diaphragm B. The pressurized air forces diaphragm B away from the center block while pulling diaphragm A to the center block. Diaphragm B is now on its discharge stroke. Diaphragm B forces the inlet valve ball onto its seat due to the hydraulic forces developed in the liquid chamber and manifold of the pump. These same hydraulic forces lift the discharge valve ball off its seat, while the opposite discharge valve ball is forced onto its seat, forcing fluid to flow through the pump discharge. The movement of diaphragm A toward the center block of the pump creates a vacuum within liquid chamber A. Atmospheric pressure forces fluid into the inlet manifold of the pump. The inlet valve ball is forced off its seat allowing the fluid being pumped to fill the liquid chamber.

 

 

FIGURE 3 At completion of the stroke, the air valve again redirects air to the back side of diaphragm A, which starts diaphragm B on its exhaust stroke. As the pump reaches its original starting point, each diaphragm has gone through one exhaust and one discharge stroke. This constitutes one complete pumping cycle. The pump may take several cycles to completely prime depending on the conditions of the application.

 

 

 

The Pro-Flo® patented air distribution system incorporates three moving parts: the air valve spool, the pilot spool, and the main shaft/diaphragm assembly. The heart of the system is the air valve spool and air valve. As shown in Figure A, this valve design incorporates an unbalanced spool. The smaller end of the spool is pressurized continuously, while the large end is alternately pressurized then exhausted to move the spool. The spool directs pressurized air to one air chamber while exhausting the other. The air causes the main shaft/diaphragm assembly to shift to one side — discharging liquid on that side and pulling liquid in on the other side. When the shaft reaches the end of its stroke, the inner piston actuates the pilot spool, which pressurizes and exhausts the large end of the air valve spool. The repositioning of the air valve spool routes

the air to the other air chamber.

 

 

 

 

 

P200 ADVANCEDTM PLASTIC RUBBER-FITTED

Height .................................. 434 mm (17.1")

Width ................................... 457 mm (18.0")

Depth .................................... 231 mm (9.1")

Est. Ship Weight ........ Polypropylene 10 kg (22 lbs)

PVDF 15 kg (32 lbs)

PFA 18 kg (40 lbs)

Air Inlet ......................................6 mm (1/4")

Inlet ............................................ 25 mm (1")

Outlet ......................................... 25 mm (1")

Suction Lift ........................ 3.6 m Dry (11.9')

9.1 m Wet (30.0')

Displacement per Stroke ......................... 0.32 l (.086 gal.)1

Max. Flow Rate .................220 lpm (58 gpm)

Max. Size Solids .................4.76 mm (3/16")

1 Displacement per stroke was calculated at 4.8 bar (70 psig) air inlet pressure against a 2 bar (30 psig) head pressure.

Example: To pump 68 lpm (18 gpm) against a discharge head pressure of 3.4 bar (50 psig) requires 4.1 bar (60 psig) and 34 Nm3 /h (20 scfm) air consumption. (See dot on chart.)

Caution: Do not exceed 5.2 bar (75 psig) air supply pressure on PFA pumps.

Caution: Do not exceed 8.6 bar (125 psig) air supply pressure on polypropylene and PVDF

pumps.

 

Flow rates indicated on chart were determined by pumping water.

For optimum life and performance, pumps should be specified so that daily operation parameters will fall in the center of the pump performance curve.

 

P200 ADVANCEDTM PLASTIC TPE-FITTED

 

Height .................................. 434 mm (17.1")

Width ................................... 457 mm (18.0")

Depth .................................... 231 mm (9.1")

Est. Ship Weight ........Polypropylene 10 kg (22 lbs)

PVDF 15 kg (32 lbs)

PFA 18 kg (40 lbs)

Air Inlet ......................................6 mm (1/4")

Inlet ............................................ 25 mm (1")

Outlet ......................................... 25 mm (1")

Suction Lift ........................ 3.5 m Dry (11.4')

9.8 m Wet (32.0')

Displacement per

Stroke ......................... 0.33 l (.088 gal.)1

Max. Flow Rate .................216 lpm (57 gpm)

Max. Size Solids .................4.76 mm (3/16")

1 Displacement per stroke was calculated at 4.8 bar

(70 psig) air inlet pressure against a 2 bar (30 psig)

head pressure.

Example: To pump 76 lpm (20 gpm) against

a discharge head pressure of 3.1 bar (45 psig)

requires 4.1 bar (60 psig) and 34 Nm3 /h (20

scfm) air consumption. (See dot on chart.)

Caution: Do not exceed 5.2 bar (75 psig) air

supply pressure on PFA pumps.

Caution: Do not exceed 8.6 bar (125 psig) air sup

ply pressure on polypropylene and PVDF pumps.

 

Flow rates indicated on chart were determined by pumping water.

For optimum life and performance, pumps should be specified so that daily operation parameters

will fall in the center of the pump performance curve.

 

P200 ADVANCEDTM PLASTIC PTFE-FITTED

Height .................................. 434 mm (17.1")

Width ................................... 457 mm (18.0")

Depth .................................... 231 mm (9.1")

Est. Ship Weight ........Polypropylene 10 kg (22 lbs)

PVDF 15 kg (32 lbs)

PFA 18 kg (40 lbs)

Air Inlet ......................................6 mm (1/4")

Inlet ............................................ 25 mm (1")

Outlet ......................................... 25 mm (1")

Suction Lift ..........................  2.4 m Dry (7.9')

9.4 m Wet (31.0')

Displacement per Stroke ......................... 0.22 l (.057 gal.)1

Max. Flow Rate .................174 lpm (46 gpm)

Max. Size Solids .................4.76 mm (3/16")

1 Displacement per stroke was calculated at 4.8 bar (70 psig) air inlet pressure against a 2 bar (30 psig) head pressure.

Example: To pump 76 lpm (20 gpm) against a discharge head pressure of 4.5 bar (65 psig)

requires 6.9 bar (100 psig) and 37 Nm3 /h (40 scfm) air consumption. (See dot on chart.)

Caution: Do not exceed 5.2 bar (75 psig) air supply pressure on PFA pumps.

Caution: Do not exceed 8.6 bar (125 psig) air supply pressure on polypropylene and PVDF pumps

 

P200PKPPPTNUTFPTV

Flow rates indicated on chart were determined by pumping water.

For optimum life and performance, pumps should be specified so that daily operation parameters

will fall in the center of the pump performance curve.

 

 

SUCTION LIFT CURVES & DATA

 

 

Suction lift curves are calibrated for pumps operating at 305 m (1,000') above sea level. This chart is meant to be a guide only. There are many variables which can affect your pump’s operating characteristics. The number of intake and discharge elbows, viscosity of pumping fluid, elevation (atmospheric pressure) and pipe friction loss all affect the amount of suction lift your pump will attain.

 

INSTALLATION

 

The Pro-Flo® model P200 Advanced™ plastic has a 25 mm (1") inlet and 25 mm (1") outlet and is designed for flows to 220 lpm (58 gpm). The P200 Advanced™ plastic pump is manufactured with wetted parts of pure, unpigmented Polypropylene or PVDF. The P200 Advanced™ plastic pump is constructed with a glass fiber filled PP center section. A variety of diaphragms and o-rings are available to satisfy temperature, chemical compatibility, abrasion, and flex concerns.

 

The suction pipe size should be at least 25 mm (1") diameter or larger if highly viscous material is being pumped. The suction hose must be non-collapsible, reinforced type as the P200 Advanced™ plastic pump is capable of pulling a high vacuum. Discharge piping should be at least 25 mm (1"); larger diameter can be used to reduce friction losses. It is critical that all fittings and connections are airtight or a reduction or loss of pump suction capability will result.

 

INSTALLATION: Months of careful planning, study, and selection efforts can result in unsatisfactory pump performance if installation details are left to chance.

 

Premature failure and long term dissatisfaction can be avoided if reasonable care is exercised throughout the installation process.

 

LOCATION: Noise, safety, and other logistical factors usually dictate where equipment should be situated on the production floor. Multiple installations with conflicting requirements can result in congestion of utility areas, leaving few choices for additional pumps.

 

Within the framework of these and other existing conditions, every pump should be located in such a way that five key factors are balanced against each other to maximum advantage.

 

ACCESS: First, the location should be accessible. If it is easy to reach the pump, maintenance personnel will have an easier time carrying out routine inspections and adjustments. Should major repairs become necessary, ease of access can play a key role in speeding the repair process and reducing total downtime.

 

AIR SUPPLY: Every pump location should have an air line large enough to supply the volume of air necessary to achieve the desired pumping rate (see Section 5). Do not exceed 5.2 bar (75 psig) air supply for PFA pumps. Use air pressure up to a maximum of 8.6 bar (125 psig) for polypropylene and PVDF pumps depending on pumping requirements.

 

For best results, the pumps should use a 5µ (micron) air filter, needle valve and regulator. The use of an air filter before the pump will insure that the majority of any pipeline contaminants will be eliminated.

 

SOLENOID OPERATION: When operation is controlled by a solenoid valve in the air line, three-way valves should be used, thus allowing trapped air to bleed off and improving

pump performance. Pumping volume can be set by counting the number of strokes per minute

and multiplying by displacement per stroke.

 

SOUND: Sound levels are reduced using the standard Wilden muffler element. Other mufflers can be used, but usually reduce pump performance.

 

ELEVATION: Selecting a site that is well within the pump’s dynamic lift capability will assure that loss-of-prime troubles will be eliminated. In addition, pump efficiency can be adversely affected if proper attention is not given to site location.

 

PIPING: Final determination of the pump site should not

be made until the piping problems of each possible location have been evaluated. The impact of current and future installations should be considered ahead of time to make sure that inadvertent restrictions are not created for any remaining sites.

 

The best choice possible will be a site involving the shortest and straightest hook-up of suction and discharge piping. Unnecessary elbows, bends, and fittings should be avoided. Pipe sizes should be selected to keep friction losses within practical limits. All piping should be supported independently of the pump. In addition, the piping should be aligned to avoid placing stresses on the pump fittings.

 

Flexible hose can be installed to aid in absorbing the forces created by the natural reciprocating action of the pump. If the pump is to be bolted down to a solid location, a mounting pad placed between the pump and the foundation will assist in minimizing pump vibration. Flexible connections between the pump and rigid piping will also assist in minimizing pump vibration. If quick-closing valves are installed at any point in the discharge system, or if pulsation within a system becomes a problem, a surge suppressor should be installed to protect the pump, piping and gauges from surges and water hammer.

 

The P200 Advanced™ plastic Pro-Flo® equipped pump can be installed in submersible applications only when both the wetted and non-wetted portions are compatible with the material being pumped. If the pump is to be used in a submersible application, a hose should be attached to the air and pilot spool exhaust ports of the pump. These should then be piped above the liquid level. The exhaust area for the pilot spool is designed to be tapped for a 1/8" NPT fitting.

 

When pumps are installed in applications involving flooded suction or suction head pressures, a gate valve should be installed in the suction line to permit closing of the line for pump service.

 

If the pump is to be used in a self-priming application, be sure that all connections are airtight and that the suction-lift is within the ability of the model. Note: Materials of construction and elastomer material have an effect on suction lift parameters. Please consult Wilden distributors for specifics.

 

Pumps in service with a positive suction head are most efficient when inlet pressure is limited to 0.5–0.7 bar (7–10 psig). Premature diaphragm failure may occur if positive suction is 0.7 bar (10 psig) and higher.

 

THE MODEL P200 ADVANCED™ PLASTIC WILL PASS 4.76 mm (3/16") SOLIDS. WHENEVER THE POSSIBILITY EXISTS THAT LARGER SOLID OBJECTS MAY BE SUCKED INTO THE PUMP, A STRAINER SHOULD BE USED ON THE SUCTION LINE.

CAUTION: DO NOT EXCEED 5.2 BAR (75 PSIG) AIR SUPPLY FOR PFA PUMPS. DO NOT EXCEED 8.6 BAR (125 PSIG) AIR SUPPLY PRESSURE FOR POLYPROPYLENE AND PVDF PUMPS.

 

 

 

AIR-OPERATED PUMPS: To stop the pump from operating in an emergency situation, simply close the “shut-off” valve (user supplied) installed in the air supply line. A properly functioning valve

will stop the air supply to the pump, therefore stopping output. This shut-off valve should be located far enough away from the pumping equipment such that it can be reached safely in an emergency situation.

 

NOTE: In the event of a power failure, the shutoff valve should be closed, if the restarting of the pump is not desirable once power is regained.

 

SUGGESTED OPERATION AND MAINTENANCE INSTRUCTIONS

 

OPERATION: Pump discharge rate can be controlled by limiting the volume and/or pressure of the air supply to the pump (preferred method). An air regulator is used to regulate air pressure. A needle valve is used to regulate volume. Pump discharge rate can also be controlled by throttling the pump discharge by partially closing a valve in the discharge line of the pump. This action increases friction loss, which reduces flow rate. This is useful when the need exists to control the pump from a remote location. When the pump discharge pressure equals or exceeds the air supply pressure, the pump will stop; no bypass or pressure relief valve is needed, and pump damage will not occur. The pump has been "deadheaded." It can be restarted by reducing the fluid discharge pressure, or increasing the air inlet pressure. The Wilden P200 Advanced™ plastic pump runs solely on compressed air and does not generate heat, therefore your process fluid temperature will not be affected.

 

RECORDS: When service is required, a record should be made of all necessary repairs and replacements. Over a period of time, such records can become a valuable tool for predicting and preventing future maintenance problems and unscheduled downtime. In addition, accurate records make it possible to identify pumps that are poorly suited to their applications.

 

MAINTENANCE AND INSPECTIONS: Since each application is unique, maintenance schedules may be different for every pump. Frequency of use, line pressure, viscosity and abrasiveness of process fluid all affect the parts life of a Wilden pump. Periodic inspections have been found to offer the best means for preventing unscheduled pump downtime. Personnel familiar with the pump’s construction and service should be informed of any abnormalities that are detected during operation

 

TROUBLESHOOTING

Pump will not run or runs slowly.

1. Ensure that the air inlet pressure is at least 0.35 bar (5 psig) above startup pressure and that the differential pressure (the difference between air inlet and liquid discharge pressures) is not less than 0.7 bar (10 psig).

2. Check air inlet filter for debris (see recommended installation).

3. Check for extreme air leakage (blow by) which would indicate worn seals/bores in the air valve, pilot spool, main shaft.

4. Disassemble pump and check for obstructions in the air passageways or objects which would obstruct the movement of internal parts.

5. Check for sticking ball check valves. If material being pumped is not compatible with pump elastomers, swelling may occur. Replace ball check valves and seals with proper elastomers. In addition, valve balls become smaller as the wear. This may cause them to become stuck in the seats. In this case, replace balls and seats.

6. Check for broken inner piston, which will prevent the air valve spool from shifting.

7. Remove plug from pilot spool exhaust, check pilot spool exhaust for blockage.

Pump runs but little or no product flows.

1. Check for pump cavitation; slow pump speed down to allow thick material to flow into liquid chambers.

2. Verify that vacuum required to lift liquid is not greater than the vapor pressure of the material being pumped (cavitation).

3. Check for sticking ball check valves. If material being pumped is not compatible with pump elastomers, swelling may occur. Replace ball check valves and seals with proper elastomers. In addition, valve balls become smaller as the wear. This may cause them to become stuck in the seats. In this case, replace balls and seats.

Pump air valve freezes.

1. Check for excessive moisture in compressed air. Install either a dryer, or hot air generator for compressed air. Alternatively, a coalescing filter may be used to remove the water from the compressed air in some applications.

Air bubbles in pump discharge.

1. Check for ruptured diaphragm.

2. Check tightness of outer pistons.

3. Check torque of bolts and integrity of o-rings and seals,

especially at intake manifold.

4. Ensure pipe connections are airtight.

Product comes out air exhaust.

1. Check for diaphragm rupture.

2. Check tightness of outer pistons to shaft

 

DIRECTIONS FOR DISASSEMBLY/REASSEMBLY

CAUTION: Before any maintenance or repair is attempted, the compressed air line to the pump should be disconnected and all air pressure allowed to bleed from the pump. Disconnect all intake, discharge, and air lines. Drain the pump by turning it upside down and allowing any fluid to flow into a suitable container. Be aware of any hazardous effects of contact with your process fluid.

TOOLS REQUIRED:

13 mm (1/2") Box Wrench 2 25 mm (1") Sockets or Adjustable Wrench Adjustable Wrench

Vise equipped with soft jaws (such as plywood, plastic or other suitable material)

NOTE: The model used for these instructions incorporates PTFE diaphragms and balls. Models with rubber diaphragms and balls are the same except where noted.

 

 

DISASSEMBLY:

Step 1.

Please see pre-molded alignment marks on the liquid chamber and center section.

 

Step 2.

Using the 13 mm (1/2) box wrench, loosen the discharge manifold from the liquid chambers.

 

P200PKPPPTNUTFPTV

-14

Step 3.

Remove the discharge manifold to expose the valve balls, valve seats and valve seat o-rings.

 

 

Step 4.

Remove the discharge valve balls, seats and valve seat o-rings from the discharge manifold and liquid chamber, inspect for nicks, gouges, chemical attack or abrasive wear. Replace worn parts with genuine Wilden parts for reliable performance.

 

 

Step 5.

Using a 13 mm (1/2") box wrench, remove the inlet manifold.

 

 

Step 6.

Remove the inlet valve balls, seats and valve seat o-rings from the liquid chamber and discharge manifold, inspect for nicks, gouges, chemical attack or abrasive wear. Replace worn parts with genuine Wilden parts for reliable performance.

 

 

Step 7.

With a 13 mm (1/2") box wrench, remove the liquid chambers from the center section.

 

 

Step 8.

The liquid chamber should be removed to expose the diaphragm and outer piston. Rotate center section and remove the opposite liquid chamber.

 

 

Step 9.

Using two crescent wrenches or 25 mm (1") sockets, remove diaphragm assembly from center section assembly.

 

 

Step 10.

After loosening and removing the outer piston the diaphragm assembly can be disassembled.

 

 

Step 11.

To remove the remaining diaphragm assembly from the shaft, secure shaft with soft jaws (a vise fitted with plywood or other suitable material) to ensure shaft is not nicked, scratched, or gouged. Using an adjustable wrench, remove diaphragm assembly from shaft. Inspect all parts for wear and replace with genuine Wilden parts if necessary.

 

 

Step 12.

Inspect diaphragms, outer and inner pistons for signs of wear. Replace with genuine Wilden parts if necessary.

 

PRO-FLO® AIR VALVE/CENTER SECTIONDISASSEMBLY, CLEANING, INSPECTION

 

AIR VALVE DISASSEMBLY:

CAUTION: Before any maintenance or repair is attempted, the compressed air line to the pump should be disconnected and all air pressure allowed to bleed from the pump. Disconnect all intake, discharge, and air lines. Drain the pump by turning it upside down and allowing any fluid to flow into a suitable container. Be aware of hazardous effects of contact with your process fluid.

The Wilden P200 AdvancedPlastic Pump utilizes a revolutionary Pro-Flo® air distribution system. A 6 mm (1/4") air inlet connects the air supply to the center section. Proprietary composite seals reduce the co efficient of friction and allow the P200 to run lube-free. Constructed of polypropylene, the Pro-Flo® air distribution system is designed to perform in on/off, non-freezing, non-stalling, tough duty applications.

TOOLS REQUIRED:

3/16" Allen Wrench

Snap Ring Pliers

O-Ring Pick

 

 

Step 1.

Loosen the air valve bolts utilizing a 3/16" Allen wrench.

 

Step 2.

Remove muffler plate and air valve bolts from air valve assembly exposing muffler

gasket for inspection. Replace if necessary.

 

 

Step 3.

Lift away air valve assembly and remove air valve gasket for inspection. Replace if necessary.

 

Step 4.

Remove air valve end cap to expose air valve spool by simply lifting up on end cap once air valve bolts are removed.

 

Step 5.

Remove air valve spool from air valve body by threading one air valve bolt into the end of the spool and gently sliding the spool out of the air valve body. Inspect seals for signs of wear and replace entire assembly if necessary. Use caution when handling air valve spool to prevent damaging seals.

 

Step 6.

Remove pilot spool sleeve retaining snap ring on both sides of center section with snap ring pliers.

NOTE: Seals should not be removed from assembly. Seals are not sold separately.

 

Step 7.

Remove pilot spool sleeve from center section.

 

P200PKPPPTNUTFPTV

Step 8.

With o-ring pick, gently remove the o-ring from the opposite side of the “center hole” cut on the spool. Gently remove the pilot spool from sleeve and inspect for nicks or gouges and other signs of wear. Replace pilot sleeve assembly or outer sleeve o-rings if necessary. During re-assembly never insert the pilot spool into the sleeve with the “center cut” side first, this end incorporates the urethane o-ring and will be damaged as it slides over the ports cut in the sleeve.

 

 

Step 9.

Check center section Glyd™ rings for signs of wear. If necessary, remove Glyd™ rings with o-ring pick and replace.

 

NOTE: Seals should not be removed from pilot spool. Seals are not sold separately.

 

REASSEMBLY HINTS & TIPS

 

ASSEMBLY:

Upon performing applicable maintenance to the air distribution system, the pump can now be reassembled. Please refer to the disassembly instructions for photos and parts placement. To reassemble the pump, follow the disassembly instructions in reverse order. The air distribution system needs to be assembled first, then the diaphragms and finally the wetted path. Please find the applicable torque specifications on this page. The following tips will assist in the assembly process.

Clean the inside of the center section shaft bore to ensure no damage is done to new seals.

Stainless bolts should be lubed to reduce the possibility of seizing during tightening.

Be sure to tighten outer pistons simultaneously on PTFEfitted pumps to ensure proper torque values.

Apply two (2) drops of Loctite® 246 to the shaft internal threads before the diaphragm assembly.

Concave side of disc spring in diaphragm assembly faces toward inner piston.

 

MAXIMUM TORQUE SPECIFICATIONS

Part Description                                       Torque

Pro-Flo® Air Valve                                     3.1 Nm (27 in-lbs)

Air Inlet Reducer Bushing                                0.9 Nm (8 in-lbs)

Outer Piston (rubber, TPE, & PTFE diaphragm fifi tted)         27.1 Nm (20 ft-lbs)

Top & Bottom Manifolds (Poly & PVDF)                     5.6 Nm (50 in-lbs)

Liquid Chamber (Poly & PVDF)                            8.5 Nm (75 in-lbs)

Top & Bottom Manifolds (PFA)                           3.4 Nm (30 in-lbs)

 

 

 

P200 ADVANCED™ PLASTIC BOLTED RUBBER-FITTED

1Air Valve Assembly includes items 2 and 3.

*Refer to corresponding elastomer chart in Section 10. 

0502 Specialty Code = PFA Coated, ANSI Flange

All boldface items are primary wear parts. Consult Factory for DIN Flange.

 

 

 

 

P200 ADVANCED™ PLASTIC BOLTED PTFE-FITTED

1Air Valve Assembly includes items 2 and 3.

*Refer to corresponding elastomer chart in Section 10.

0502 Specialty Code = PFA Coated, ANSI Flange

All boldface items are primary wear parts.Consult Factory for DIN Flange.

 

P200 ADVANCED™ PLASTIC

 

1Saniflex™ and EPDM back-up diaphragms are available upon request. Please consult your local distributor.

 

WARRANTY

Each and every product manufactured by Wilden Pump and Engineering, LLC is built to meet the highest standards of quality. Every pump is functionally tested to insure integrity of operation.

 

Wilden Pump and Engineering, LLC warrants that pumps, accessories and parts manufactured or supplied by it to be free from defects in material and workmanship for a period of fifive (5) years from date of installation or six (6) years from date of manufacture, whichever comes fifirst. Failure due to normal wear, misapplication, or abuse is, of course, excluded from this warranty.

 

Since the use of Wilden pumps and parts is beyond our control, we cannot guarantee the suitability of any pump or part for a particular application and Wilden Pump and Engineering, LLC shall not be liable for any consequential damage or expense arising from the use or misuse of its products on any application. Responsibility is limited solely to replacement or repair of defective Wilden pumps and parts.

 

All decisions as to the cause of failure are the sole determination of Wilden Pump and Engineering, LLC.

 

Prior approval must be obtained from Wilden for return of any items for warranty consideration and must be accompanied by the appropriate MSDS for the product(s) involved. A Return Goods Tag, obtained from an authorized Wilden distributor, must be included with the items which must be shipped freight prepaid.

 

The foregoing warranty is exclusive and in lieu of all other warranties expressed or implied (whether written or oral) including all implied warranties of merchantability and fifitness for any particular purpose. No distributor or other person is authorized to assume any liability or obligation for Wilden Pump and Engineering, LLC other than expressly provided herein.

Write Your Own Review
You're reviewing:Wilden Diaphragm Pump P200PKPPPTNUTFPTV